en to unknown language translation catalogue (1167 entries)

[ctx: 10]
en: 
    Default flightmode cannot be deleted!
target: Standard flightmode kan ikke slettes!

[ctx: 10]
en: 
    Proceed?
target: 
    Fortsett?

[ctx: 10]
en: Control
target: Kontroll

[ctx: 10]
en: Delete
target: Slett

[ctx: 10]
en: Fade In
target: Tone inn

[ctx: 10]
en: Help
target: Hjelp

[ctx: 10]
en: Name
target: Navn

[ctx: 10]
en: State
target: Status

[ctx: 10]
en: You are about to delete the following FlightMode:
target: Du er i ferd med å slette følgende Flightmode:

[ctx: 14_Settings_System]
en: 12h
target: 12t

[ctx: 14_Settings_System]
en: 24h
target: 24t

[ctx: 14_Settings_System]
en: Automatic
target: Automatisk

[ctx: 14_Settings_System]
en: Calibration
target: Kalibrering

[ctx: 14_Settings_System]
en: Check
target: Sjekk

[ctx: 14_Settings_System]
en: Date
target: Dato

[ctx: 14_Settings_System]
en: Date/Time
target: Dato/Tid

[ctx: 14_Settings_System]
en: Export
target: Eksport

[ctx: 14_Settings_System]
en: Fast start
target: Hurtigstart

[ctx: 14_Settings_System]
en: Language
target: Språk

[ctx: 14_Settings_System]
en: Location/Time zone
target: Lokasjon/Tidssone

[ctx: 14_Settings_System]
en: Manually
target: Manuelt

[ctx: 14_Settings_System]
en: Metric
target: Metrisk

[ctx: 14_Settings_System]
en: Off
target: Av

[ctx: 14_Settings_System]
en: On
target: På

[ctx: 14_Settings_System]
en: Pilotname
target: Pilotnavn

[ctx: 14_Settings_System]
en: S.BUS In
target: S.BUS Inn

[ctx: 14_Settings_System]
en: SRXL In
target: SRXL Inn

[ctx: 14_Settings_System]
en: Serial number
target: Serienummer

[ctx: 14_Settings_System]
en: Summer
target: Sommer

[ctx: 14_Settings_System]
en: System information
target: System informasjon

[ctx: 14_Settings_System]
en: System information cannot be exported to USB device. Check available space or insert another one!
target: System informasjon kan ikke bli eksportert til USB enheten. Sjekk tilgjenglig plass eller sett inn en annen en!

[ctx: 14_Settings_System]
en: System information successfully exported!
target: System informasjon eksport vellykket!

[ctx: 14_Settings_System]
en: Telemetry logging
target: Telemetri logging

[ctx: 14_Settings_System]
en: Time
target: Tid

[ctx: 14_Settings_System]
en: Units
target: Enheter

[ctx: 14_Settings_System]
en: Winter
target: Vinter

[ctx: 14_Settings_System]
en: dd-mm-yyyy
target: dd.mm.åååå

[ctx: 14_Settings_System]
en: hh:mm
target: tt:mm

[ctx: 15]
en: Master Volume
target: Master Volum

[ctx: 15]
en: Volume Telemetry Alarms
target: Volum Telemetri alarmer

[ctx: 15]
en: Volume Timer Alarms
target: Volum Timer alarmer

[ctx: 15]
en: Volume Trim Clicks
target: Volum trim klikk

[ctx: 15]
en: Volume Vario
target: Volum Vario

[ctx: 16]
en: Delete
target: Slett

[ctx: 16]
en: Do you really want to delete this timer?
target: Vil du virkelig slette denne timeren?

[ctx: 16]
en: Setup
target: Oppsett

[ctx: 16]
en: Start Time
target: Start Tid

[ctx: 16]
en: Stop Time
target: Stopp tid

[ctx: 16]
en: Timer Name
target: Timernavn

[ctx: 18]
en: 2-pos
target: 2-Pos

[ctx: 18]
en: 3-pos
target: 3-Pos

[ctx: 18]
en: Calibration
target: Kalibrering

[ctx: 18]
en: Cancel
target: Avbryt

[ctx: 18]
en: Center Position
target: Senterposisjon

[ctx: 18]
en: Control
target: Kontroll

[ctx: 18]
en: Direct.
target: Retn.

[ctx: 18]
en: Endpositions
target: Endeposisjoner

[ctx: 18]
en: Invers
target: Invertert

[ctx: 18]
en: Move Control to
target: Flytt kontroll til

[ctx: 18]
en: Please move the control
target: Vennligst bevege på kontrollen

[ctx: 18]
en: Proceed
target: Fortsett

[ctx: 18]
en: Ready
target: Klar

[ctx: 18]
en: linear
target: lineær

[ctx: 18]
en: you wish to calibrate
target: du ønsker å kalibrere

[ctx: 19]
en: Are you sure you would like to delete this mixer?
target: Er du sikker på at du vil slette denne mikseren?

[ctx: 19]
en: Delete
target: Slett

[ctx: 19]
en: Help
target: Hjelp

[ctx: 19]
en: Name
target: Navn

[ctx: 19]
en: Setup
target: Sett opp

[ctx: 19]
en: from Function
target: fra funksjon

[ctx: 19]
en: to Function
target: til funksjon

[ctx: 1_System_Appearance]
en: 15 Min.
target: 10 Min.

[ctx: 1_System_Appearance]
en: Accent Color
target: Fargetone

[ctx: 1_System_Appearance]
en: Auto Lock
target: Auto lås

[ctx: 1_System_Appearance]
en: Background
target: Bakgrunn

[ctx: 1_System_Appearance]
en: Black
target: Svart

[ctx: 1_System_Appearance]
en: Brightness
target: Lysstyrke

[ctx: 1_System_Appearance]
en: Icon
target: Ikon

[ctx: 1_System_Appearance]
en: Idle Alarm
target: Inaktiv alarm

[ctx: 1_System_Appearance]
en: Off
target: Av

[ctx: 1_System_Appearance]
en: On
target: På

[ctx: 1_System_Appearance]
en: White
target: Hvit

[ctx: 20]
en: Control
target: Kontroll

[ctx: 20]
en: Curve Editor
target: Kurveeditor

[ctx: 20]
en: Do you really want to reset all settings of this mixer to the values of '
target: Vil du virkelig resette all innstillinger for denne mikseren til verdiene av

[ctx: 20]
en: Edit
target: Editere

[ctx: 20]
en: Flight Mode
target: Flightmode

[ctx: 20]
en: Mixer
target: Mikser

[ctx: 20]
en: Run time
target: Kjøretid

[ctx: 20]
en: Single
target: Singel

[ctx: 20]
en: from
target: fra

[ctx: 20]
en: to
target: til

[ctx: 21]
en: ' and cannot be deleted!
target: ' og kan ikke slettes!

[ctx: 21]
en: Control
target: Kontroll

[ctx: 21]
en: Delete
target: Slett

[ctx: 21]
en: Do you really want to delete this virtual switch?
target: Vil du virkelig slette denne virtuelle bryteren?

[ctx: 21]
en: Input state
target: Input tilstand

[ctx: 21]
en: Logic
target: logikk

[ctx: 21]
en: Name
target: Navn

[ctx: 21]
en: Output state
target: Output tilstand

[ctx: 21]
en: The selected virtual switch is used as an input of '
target: Den valgte virtuelle bryteren er brukt som input til

[ctx: 22]
en: Beep
target: Bip

[ctx: 22]
en: Center
target: Senter

[ctx: 22]
en: Control
target: Trim Valg

[ctx: 22]
en: Direction
target: Retning

[ctx: 22]
en: Do you really want to reset all settings of this trim to the global values?
target: Vil du virkelig resette all innstillinger for denne trimmen til globale verdier?

[ctx: 22]
en: Flight Mode
target: Flightmode

[ctx: 22]
en: Left
target: Venstre

[ctx: 22]
en: Mode
target: Type

[ctx: 22]
en: None
target: Ingen

[ctx: 22]
en: Reverse
target: Revers

[ctx: 22]
en: Right
target: Høyre

[ctx: 22]
en: Single
target: Singel

[ctx: 22]
en: Steps
target: Steg

[ctx: 22]
en: Trim Position
target: Trim Posisjon

[ctx: 22]
en: Trim Setup:
target: Trim Oppsett:

[ctx: 22]
en: Trimrange
target: Trim rekkevidde

[ctx: 22]
en: Vibr. + Beep
target: Vibr. + Bip

[ctx: 22]
en: Vibration
target: Vibrasjon

[ctx: 24]
en: DO NOT TURN OFF YOUR TRANSMITTER!
target: IKKE SKRU AV SENDEREN!

[ctx: 24]
en: Progress
target: Fremdrift

[ctx: 24]
en: Update in progress
target: Oppdatering pågår

[ctx: 24]
en: Update successful!
    Please press OK
target: Oppdatering vellykket!
    Vennligst trykk OK

[ctx: 25_FunctionCurveEditor]
en: Function:
target: Funksjon:

[ctx: 25_FunctionCurveEditor]
en: Points
target: Punkter

[ctx: 25_FunctionCurveEditor]
en: Raw
target: Rå

[ctx: 25_FunctionCurveEditor]
en: Reset Curve
target: Nullstill kurve

[ctx: 25_FunctionCurveEditor]
en: Select Point
target: Velg punkt

[ctx: 25_FunctionCurveEditor]
en: Smooth
target: Jevn

[ctx: 25_FunctionCurveEditor]
en: Value
target: Verdi

[ctx: 26]
en: Cancel
target: Avbryt

[ctx: 26]
en: Center
target: Senter

[ctx: 26]
en: Direct.
target: Retn.

[ctx: 26]
en: Limit
target: Grense

[ctx: 26]
en: Please select servo and function:
target: Vennligst velg servo og funksjon:

[ctx: 26]
en: Select Function:
target: Velg funksjon:

[ctx: 26]
en: Select servo:
target: Velg servo:

[ctx: 26]
en: Way
target: Dist

[ctx: 27_FunctionServos]
en: Are you sure you would like to delete this servo?
target: Er du sikker på at du vil slette denne servoen?

[ctx: 27_FunctionServos]
en: Cancel
target: Avbryt

[ctx: 27_FunctionServos]
en: Center
target: Senter

[ctx: 27_FunctionServos]
en: Delete
target: Slett

[ctx: 27_FunctionServos]
en: Direct.
target: Retn.

[ctx: 27_FunctionServos]
en: Limit
target: Grense

[ctx: 27_FunctionServos]
en: Please select an available servo:
target: Vennligst velg en tilgjengelig servo:

[ctx: 27_FunctionServos]
en: Select servo:
target: Velg servo:

[ctx: 27_FunctionServos]
en: Way
target: Distanse

[ctx: 28]
en: Cancel
target: Avbryt

[ctx: 28]
en: Fixvalue
target: Fast verdi

[ctx: 28]
en: Function
target: Funksjon

[ctx: 28]
en: Mode
target: Type

[ctx: 28]
en: Momentary
target: Momantan

[ctx: 28]
en: Off
target: Av

[ctx: 28]
en: On
target: På

[ctx: 29]
en: Cancel
target: Avbryt

[ctx: 29]
en: Delete Trim
target: Slett trim

[ctx: 29]
en: Function
target: Funksjon

[ctx: 2_0]
en: Telemetrytype
target: Telemetritype

[ctx: 2_0]
en: Value
target: Verdi

[ctx: 2_Home]
en:  - File not found or corrupted!
target: '- filen ikke funnet eller er ødelagt!

[ctx: 2_Home]
en:  - Model Error
target:  - Modell feil

[ctx: 2_Home]
en:  Trims unlocked!
target:  Trimmer ulåst!

[ctx: 2_Home]
en: Cancel
target: Avbryt

[ctx: 2_Home]
en: Check positions:
target: Sjekk posisjoner:

[ctx: 2_Home]
en: Model Fast Start!
target: Model hurtig Start!

[ctx: 2_Home]
en: Model loading...
target: Laster modell...

[ctx: 2_Home]
en: Model:
target: Modell:

[ctx: 2_Home]
en: Page
target: Side

[ctx: 2_Home]
en: Please perform new rescan manually!
target: Vennligst gjør en ny rescan manuelt!

[ctx: 2_Home]
en: Sensors auto rescan...
     Attempt #
target: Auto rescan av sensorer...
    Forsøk #

[ctx: 2_Home]
en: Starting radio...
target: Starter radio...

[ctx: 2_Home]
en: Trims LOCKED!
target: Trimmer LÅST!

[ctx: 30]
en: Cancel
target: Avbryt

[ctx: 30]
en: Fixvalue
target: Fast verdi

[ctx: 30]
en: Function
target: Funksjon

[ctx: 30]
en: Off
target: Av

[ctx: 30]
en: On
target: På

[ctx: 31]
en: Cancel
target: Avbryt

[ctx: 31]
en: Fixvalue
target: Fast verdi

[ctx: 31]
en: Function
target: Funksjon

[ctx: 31]
en: Off
target: Av

[ctx: 31]
en: On
target: På

[ctx: 32]
en: Cancel
target: Avbryt

[ctx: 32]
en: Fixvalue
target: Fast verdi

[ctx: 32]
en: Function
target: Funksjon

[ctx: 32]
en: Off
target: Av

[ctx: 32]
en: On
target: På

[ctx: 33_MixerCurveEditor]
en: Mixer:
target: Mikser:

[ctx: 33_MixerCurveEditor]
en: Points
target: Punkter

[ctx: 33_MixerCurveEditor]
en: Raw
target: Rå

[ctx: 33_MixerCurveEditor]
en: Reset Curve
target: Nullstill kurve

[ctx: 33_MixerCurveEditor]
en: Select Point
target: Velg punkt

[ctx: 33_MixerCurveEditor]
en: Smooth
target: Jevn

[ctx: 33_MixerCurveEditor]
en: Value
target: Verdi

[ctx: 35_TimerSetup]
en: Audio Settings
target: Audio innstillinger

[ctx: 35_TimerSetup]
en: Auto-Reset
target: Auto Reset

[ctx: 35_TimerSetup]
en: Beep
target: Bip

[ctx: 35_TimerSetup]
en: Center
target: Senter

[ctx: 35_TimerSetup]
en: Control
target: Kontroll

[ctx: 35_TimerSetup]
en: Current Value
target: Aktuell verdi

[ctx: 35_TimerSetup]
en: Delete
target: Slett

[ctx: 35_TimerSetup]
en: Do you really want to delete this timer control?
target: Vil du virkelig slette denne timer funksjonen?

[ctx: 35_TimerSetup]
en: Hi - Down
target: Høy - Ned

[ctx: 35_TimerSetup]
en: Hi - Up
target: Høy - Opp

[ctx: 35_TimerSetup]
en: Lo - Down
target: Lav - Ned

[ctx: 35_TimerSetup]
en: Lo - Up
target: Lav - Opp

[ctx: 35_TimerSetup]
en: No Alarm
target: Ingen alarm

[ctx: 35_TimerSetup]
en: OFF
target: AV

[ctx: 35_TimerSetup]
en: ON
target: PÅ

[ctx: 35_TimerSetup]
en: On
target: På

[ctx: 35_TimerSetup]
en: Reset
target: Nullstill

[ctx: 35_TimerSetup]
en: Start Time
target: Start tid

[ctx: 35_TimerSetup]
en: Stop
target: Stopp

[ctx: 35_TimerSetup]
en: Stop Time
target: Stopp tid

[ctx: 35_TimerSetup]
en: Text
target: Tekst

[ctx: 35_TimerSetup]
en: Timer Name
target: Timernavn

[ctx: 35_TimerSetup]
en: Vibration
target: Vibrasjon

[ctx: 35_TimerSetup]
en: Voice
target: Tale

[ctx: 36_ControlSelector]
en: Activation
target: Aktivering

[ctx: 36_ControlSelector]
en: Activator
target: Aktivator

[ctx: 36_ControlSelector]
en: Core control
target: Core kontroll

[ctx: 36_ControlSelector]
en: FM control #
target: FM kontroll #

[ctx: 36_ControlSelector]
en: Fixvalue
target: Fast verdi

[ctx: 36_ControlSelector]
en: Function
target: Funksjon

[ctx: 36_ControlSelector]
en: Mixer
target: Mikser

[ctx: 36_ControlSelector]
en: Mode
target: Type

[ctx: 36_ControlSelector]
en: Momentary
target: Momentan

[ctx: 36_ControlSelector]
en: ON-OFF
target: PÅ-AV

[ctx: 36_ControlSelector]
en: Please select another one!
target: Vennligst velg en annen!

[ctx: 36_ControlSelector]
en: Switch
target: Bryter

[ctx: 36_ControlSelector]
en: T-Con ON/OFF
target: T-Con PÅ/AV

[ctx: 36_ControlSelector]
en: Telem. alarms
target: Telem. alarmer

[ctx: 36_ControlSelector]
en: Telemetry
target: Telemetri

[ctx: 36_ControlSelector]
en: This control is a control of function
target: Denne kontrollen styrer en funksjon

[ctx: 36_ControlSelector]
en: Timer alarms
target: Timer alarmer

[ctx: 36_ControlSelector]
en: Trainer cord
target: Skolekabel

[ctx: 36_ControlSelector]
en: Trim clicks
target: Trim klikk

[ctx: 36_ControlSelector]
en: V-switch
target: V-bryter

[ctx: 36_ControlSelector]
en: Vario beeps
target: Vario bip

[ctx: 36_ControlSelector]
en: Voice
target: Tale

[ctx: 36_ControlSelector]
en: Volume
target: Volum

[ctx: 37]
en: Cancel
target: Avbryt

[ctx: 37]
en: Fixvalue
target: Fast verdi

[ctx: 37]
en: Off
target: Av

[ctx: 37]
en: On
target: På

[ctx: 37]
en: Switch
target: Bryter

[ctx: 4_0]
en: 
    Proceed?
target: 
    Fortsett?

[ctx: 4_0]
en: Control
target: Kontroll

[ctx: 4_0]
en: Delete
target: Slett

[ctx: 4_0]
en: FS all
target: Alle FS

[ctx: 4_0]
en: Failsafe teached!
target: Failsafe innlært!

[ctx: 4_0]
en: Function
target: Funksjon

[ctx: 4_0]
en: Help
target: Hjelp

[ctx: 4_0]
en: Off
target: Av

[ctx: 4_0]
en: Position
target: Posisjon

[ctx: 4_0]
en: Setup
target: Oppsett

[ctx: 4_0]
en: Teach
target: Lærer

[ctx: 4_0]
en: You are about to delete the following function:
target: Du er i ferd med å slette følgende funksjon:

[ctx: 4_1]
en: Cancel
target: Avbryt

[ctx: 4_1]
en: Fix OFF
target: Fast AV

[ctx: 4_1]
en: Fix ON
target: Fast PÅ

[ctx: 4_1]
en: Function:
target: Funksjon:

[ctx: 4_1]
en: On/Off Position
target: Av/På posisjon

[ctx: 4_1]
en: Trim Range
target: Trim område

[ctx: 4_1]
en: Trim Steps
target: Trim steg

[ctx: 4_1]
en: Unselect Trim
target: Velg bort trim

[ctx: 4_1]
en: Virtual Switch
target: Virtuell bryter

[ctx: 5]
en: Function Setup:
target: Funksjonsopps:

[ctx: 5]
en: Linear
target: Lineær

[ctx: 5]
en: Linie
target: Linje

[ctx: 5_0]
en: Flight Mode
target: Flightmode

[ctx: 5_0]
en: Single
target: Singel

[ctx: 5_1]
en: Control Expo
target: Kontroll Expo

[ctx: 5_1]
en: Control Rate
target: Kontroll Rate

[ctx: 5_1]
en: Curve Editor
target: Kurveeditor

[ctx: 5_1]
en: Do you really want to reset all settings of this function to the values of '
target: Vil du virkelig resette all innstillinger for denne funksjonen til verdiene av

[ctx: 5_1]
en: Edit
target: Editere

[ctx: 5_1]
en: Expo left
target: Expo venstre

[ctx: 5_1]
en: Expo right
target: Expo høyre

[ctx: 5_1]
en: Flight Mode
target: Flightmode

[ctx: 5_1]
en: Run time
target: Gangtid

[ctx: 5_1]
en: Single
target: Singel

[ctx: 5_2]
en: Flight Mode
target: Flightmode

[ctx: 5_2]
en: Insert
target: Sett inn

[ctx: 5_2]
en: Point
target: Punkt

[ctx: 5_2]
en: Single
target: Singel

[ctx: 8]
en: Latitude
target: Breddegrad

[ctx: 8]
en: Longitude
target: Lengdegrad

[ctx: 8]
en: Satellites
target: Satelitter

[ctx: 9_BindingMenu]
en: Are you sure you would like to perform a range test?
    Your RF power will be reduced for 120 seconds.
target: Er du sikker på at du vil utføre en rekkeviddetest!
    Sendestyrken vil være redusert i 120 sekunder.

[ctx: 9_BindingMenu]
en: Binding Receiver
target: Binder Mottaker

[ctx: 9_BindingMenu]
en: Cancel
target: Avbryt

[ctx: 9_BindingMenu]
en: If you change the framerate, you must bind all receivers new!
    Do you really want to change the framerate?
target: Hvis du endrer framerate, så må alle mottakere bindes på nytt"
    Vil du virkelig endre framerate?

[ctx: 9_BindingMenu]
en: It will be moved to position
target: Den blir flyttet til posisjon

[ctx: 9_BindingMenu]
en: NO LINK
target: INGEN LINK

[ctx: 9_BindingMenu]
en: New binding info must be generated!
target: Ny bindeinfo må genereres!

[ctx: 9_BindingMenu]
en: No receiver is bound. Please bind at least one receiver.
target: Ingen mottaker er bundet. Vennligst bind minst en mottaker.

[ctx: 9_BindingMenu]
en: Please reconnect power to your receiver once again to rebind it.
target: Vennligst koble til mottakeren på nytt for å binde den.

[ctx: 9_BindingMenu]
en: Please switch on receiver!
target: Vennligst slå på mottaker!

[ctx: 9_BindingMenu]
en: Rangetest
target: Rekkeviddetest

[ctx: 9_BindingMenu]
en: Receiver A
target: Mottaker A

[ctx: 9_BindingMenu]
en: Receiver B
target: Mottaker B

[ctx: 9_BindingMenu]
en: Receiver C
target: Mottaker C

[ctx: 9_BindingMenu]
en: Receiver D
target: Mottaker D

[ctx: 9_BindingMenu]
en: Remove
target: Fjern

[ctx: 9_BindingMenu]
en: Reset Timer
target: Nullstill Timer

[ctx: 9_BindingMenu]
en: Successful!
target: Vellykket!

[ctx: 9_BindingMenu]
en: To add another receiver to the existing binding code click "Add".
    To reset the binding code click "Reset"
target: For å legge en ny mottaker til eksisterende bindekode trykk "Legg til".
    For å nullstille bindekode trykk"Nullstill"

[ctx: 9_BindingMenu]
en: WARNING: Range test active!
target: ADVARSEL: Rekkeviddetest aktiv!

[ctx: 9_BindingMenu]
en: You try to bind a receiver that is already bound at position
target: Du forsøker å binde en mottaker som allerede er bundet på posisjon

[ctx: AlarmMessageSettings]
en: Speech short
target: Tale kort

[ctx: AlarmMessageSettings]
en: Speech value
target: Tale verdi

[ctx: AlarmMessageSettings]
en: Timer Name
target: Timernavn

[ctx: AlarmMessageSettings]
en: Voice
target: Stemme

[ctx: AlarmMessageSettings]
en: text
target: tekst

[ctx: AssistantAcro_delta_start]
en: Brake
target: Bremse

[ctx: AssistantAcro_delta_start]
en: Delta_A-L
target: Delta_A-V

[ctx: AssistantAcro_delta_start]
en: Delta_A-R
target: Delta_A-H

[ctx: AssistantAcro_delta_start]
en: Delta_A_Ail
target: Delta_A_Bal

[ctx: AssistantAcro_delta_start]
en: Delta_A_Ele
target: Delta_A_Høyde

[ctx: AssistantAcro_delta_start]
en: Delta_B-L
target: Delta_B-V

[ctx: AssistantAcro_delta_start]
en: Delta_B-R
target: Delta_B-H

[ctx: AssistantAcro_delta_start]
en: Delta_B_Ail
target: Delta_B_Bal

[ctx: AssistantAcro_delta_start]
en: Delta_B_Ele
target: Delta_B_Høyde

[ctx: AssistantAcro_delta_start]
en: Flap
target: Flaps

[ctx: AssistantAcro_delta_start]
en: Flap-L
target: Flaps-V

[ctx: AssistantAcro_delta_start]
en: Flap-R
target: Flaps-H

[ctx: AssistantAcro_delta_start]
en: Flight Mode
target: Flightmode

[ctx: AssistantAcro_delta_start]
en: Gear
target: Understell

[ctx: AssistantAcro_delta_start]
en: Gear + Brake
target: Understell + Bremse

[ctx: AssistantAcro_delta_start]
en: Ignition
target: Tenning

[ctx: AssistantAcro_delta_start]
en: Left Wing
target: Venstre vinge

[ctx: AssistantAcro_delta_start]
en: Light
target: Lys

[ctx: AssistantAcro_delta_start]
en: Proceed
target: Fortsett

[ctx: AssistantAcro_delta_start]
en: Right Wing
target: Høyre vinge

[ctx: AssistantAcro_delta_start]
en: Rudder
target: Sideror

[ctx: AssistantAcro_delta_start]
en: Rudder-L
target: Sideror-V

[ctx: AssistantAcro_delta_start]
en: Rudder-R
target: Sideror-H

[ctx: AssistantAcro_delta_start]
en: Smoke
target: Røyk

[ctx: AssistantAcro_delta_start]
en: Tail
target: Hale

[ctx: AssistantAcro_delta_start]
en: Throttle + Smoke
target: Throttle + Røyk

[ctx: AssistantAcro_delta_start]
en: You did not set any function, the assistant will be closed. A new model with an empty function list will be created.
    Continue?
target: Du har ikke satt opp noen funksjoner, assistenten stenger. En ny modell med en tom funksjonsliste blir laget.
    Fortsett?

[ctx: AssistantAcro_start]
en: Aileron
target: Balanseror

[ctx: AssistantAcro_start]
en: Aileron L
target: Balanseror V

[ctx: AssistantAcro_start]
en: Aileron R
target: Balanseror H

[ctx: AssistantAcro_start]
en: Brake
target: Bremse

[ctx: AssistantAcro_start]
en: Elevator
target: Høyderor

[ctx: AssistantAcro_start]
en: Elevator L
target: Høyderor V

[ctx: AssistantAcro_start]
en: Elevator R
target: Høyderor H

[ctx: AssistantAcro_start]
en: Flap
target: Flaps

[ctx: AssistantAcro_start]
en: Flap L
target: Flaps V

[ctx: AssistantAcro_start]
en: Flap R
target: Flaps H

[ctx: AssistantAcro_start]
en: Flight Mode
target: Flightmode

[ctx: AssistantAcro_start]
en: Gear
target: Understell

[ctx: AssistantAcro_start]
en: Gear + Brake
target: Understell + bremse

[ctx: AssistantAcro_start]
en: Ignition
target: Tenning

[ctx: AssistantAcro_start]
en: Light
target: Lys

[ctx: AssistantAcro_start]
en: Proceed
target: Fortsett

[ctx: AssistantAcro_start]
en: Rudder
target: Sideror

[ctx: AssistantAcro_start]
en: Rudder L
target: Sideror V

[ctx: AssistantAcro_start]
en: Rudder R
target: Sideror H

[ctx: AssistantAcro_start]
en: Smoke
target: Røyk

[ctx: AssistantAcro_start]
en: Tail
target: Hale

[ctx: AssistantAcro_start]
en: Throttle + Smoke
target: Throttle + Røyk

[ctx: AssistantAcro_start]
en: Wing
target: Vinge

[ctx: AssistantAcro_start]
en: You did not set any function, the assistant will be closed. A new model with an empty function list will be created.
    Continue?
target: Du har ikke satt opp noen funksjoner, assistenten stenger. En ny modell med en tom funksjonsliste blir laget.
    Fortsett?

[ctx: AssistantAcro_vtail_start]
en: Aileron
target: Balanseror

[ctx: AssistantAcro_vtail_start]
en: Aileron L
target: Balanseror V

[ctx: AssistantAcro_vtail_start]
en: Aileron R
target: Balanseror H

[ctx: AssistantAcro_vtail_start]
en: Brake
target: Bremse

[ctx: AssistantAcro_vtail_start]
en: Flap
target: Flaps

[ctx: AssistantAcro_vtail_start]
en: Flap L
target: Flaps V

[ctx: AssistantAcro_vtail_start]
en: Flap R
target: Flaps H

[ctx: AssistantAcro_vtail_start]
en: Flight Mode
target: Flightmode

[ctx: AssistantAcro_vtail_start]
en: Gear
target: Understell

[ctx: AssistantAcro_vtail_start]
en: Gear + Brake
target: Understell + Bremse

[ctx: AssistantAcro_vtail_start]
en: Ignition
target: Tenning

[ctx: AssistantAcro_vtail_start]
en: Light
target: Lys

[ctx: AssistantAcro_vtail_start]
en: Proceed
target: Fortsett

[ctx: AssistantAcro_vtail_start]
en: Smoke
target: Røyk

[ctx: AssistantAcro_vtail_start]
en: Tail
target: Hale

[ctx: AssistantAcro_vtail_start]
en: Throttle + Smoke
target: Throttle + Røyk

[ctx: AssistantAcro_vtail_start]
en: V-Tail Ele
target: V-Hale Høyde

[ctx: AssistantAcro_vtail_start]
en: V-Tail L
target: V-Hale V

[ctx: AssistantAcro_vtail_start]
en: V-Tail R
target: V-Hale H

[ctx: AssistantAcro_vtail_start]
en: V-Tail Rudd
target: V-Hale Sideror

[ctx: AssistantAcro_vtail_start]
en: Wing
target: Vinge

[ctx: AssistantAcro_vtail_start]
en: You did not set any function, the assistant will be closed. A new model with an empty function list will be created.
    Continue?
target: Du har ikke satt opp noen funksjoner, assistenten stenger. En ny modell med en tom funksjonsliste blir laget.
    Fortsett?

[ctx: AssistantControlChooser]
en: Cancel
target: Avbryt

[ctx: AssistantControlChooser]
en: Fixvalue
target: Fast verdi

[ctx: AssistantControlChooser]
en: Function
target: Funksjon

[ctx: AssistantControlChooser]
en: Mode
target: Type

[ctx: AssistantControlChooser]
en: Momentary
target: Momentan

[ctx: AssistantControlChooser]
en: Off
target: Av

[ctx: AssistantControlChooser]
en: On
target: På

[ctx: AssistantDeltaVtailControlBox]
en: Aileron Control
target: Bal.ror ktrl

[ctx: AssistantDeltaVtailControlBox]
en: Control
target: Kontroll

[ctx: AssistantDeltaVtailControlBox]
en: Elevator Control
target: H.ror ktrl

[ctx: AssistantDeltaVtailControlBox]
en: Rudder Control
target: Siderorskontroll

[ctx: AssistantFunctionContainer]
en: Control
target: Kontroll

[ctx: AssistantJet_delta_start]
en: Brake
target: Bremse

[ctx: AssistantJet_delta_start]
en: Delta_A-L
target: Delta_A-V

[ctx: AssistantJet_delta_start]
en: Delta_A-R
target: Delta_A-H

[ctx: AssistantJet_delta_start]
en: Delta_A_Ail
target: Delta_A_Bal

[ctx: AssistantJet_delta_start]
en: Delta_A_Ele
target: Delta_A_Høyde

[ctx: AssistantJet_delta_start]
en: Delta_B-L
target: Delta_B-V

[ctx: AssistantJet_delta_start]
en: Delta_B-R
target: Delta_B-H

[ctx: AssistantJet_delta_start]
en: Delta_B_Ail
target: Delta_B_Bal

[ctx: AssistantJet_delta_start]
en: Delta_B_Ele
target: Delta_B_Høyde

[ctx: AssistantJet_delta_start]
en: Flap
target: Flaps

[ctx: AssistantJet_delta_start]
en: Flap-L
target: Flaps-V

[ctx: AssistantJet_delta_start]
en: Flap-R
target: Flaps-H

[ctx: AssistantJet_delta_start]
en: Flight Mode
target: Flightmode

[ctx: AssistantJet_delta_start]
en: Gear
target: Understell

[ctx: AssistantJet_delta_start]
en: Gear + Brake
target: Understell + bremse

[ctx: AssistantJet_delta_start]
en: Gyro + Vector
target: Gyro + Vektor

[ctx: AssistantJet_delta_start]
en: Left Wing
target: Venstre vinge

[ctx: AssistantJet_delta_start]
en: Light
target: Lys

[ctx: AssistantJet_delta_start]
en: Proceed
target: Fortsett

[ctx: AssistantJet_delta_start]
en: Right Wing
target: Høyre vinge

[ctx: AssistantJet_delta_start]
en: Rudder
target: Sideror

[ctx: AssistantJet_delta_start]
en: Rudder-L
target: Sideror-V

[ctx: AssistantJet_delta_start]
en: Rudder-R
target: Sideror-H

[ctx: AssistantJet_delta_start]
en: Smoke
target: Røyk

[ctx: AssistantJet_delta_start]
en: Tail
target: Hale

[ctx: AssistantJet_delta_start]
en: Throttle + Smoke
target: Throttle + Røyk

[ctx: AssistantJet_delta_start]
en: Throttle-2
target: Throttle-1

[ctx: AssistantJet_delta_start]
en: Vector Elev
target: Vektor høyde

[ctx: AssistantJet_delta_start]
en: Vector Rudd
target: Vektor Side

[ctx: AssistantJet_delta_start]
en: You did not set any function, the assistant will be closed. A new model with an empty function list will be created.
    Continue?
target: Du har ikke satt opp noen funksjoner, assistenten stenger. En ny modell med en tom funksjonsliste blir laget.
    Fortsett?

[ctx: AssistantJet_start]
en: Aileron
target: Balanseror

[ctx: AssistantJet_start]
en: Aileron L
target: Balanseror V

[ctx: AssistantJet_start]
en: Aileron R
target: Balanseror H

[ctx: AssistantJet_start]
en: Brake
target: Bremse

[ctx: AssistantJet_start]
en: Elevator
target: Høyderor

[ctx: AssistantJet_start]
en: Elevator L
target: Høyderor V

[ctx: AssistantJet_start]
en: Elevator R
target: Høyderor H

[ctx: AssistantJet_start]
en: Flap
target: Flaps

[ctx: AssistantJet_start]
en: Flap L
target: Flaps V

[ctx: AssistantJet_start]
en: Flap R
target: Flaps H

[ctx: AssistantJet_start]
en: Flight Mode
target: Flightmode

[ctx: AssistantJet_start]
en: Gear
target: Understell

[ctx: AssistantJet_start]
en: Gear + Brake
target: Understell + Bremse

[ctx: AssistantJet_start]
en: Gyro + Vector
target: Gyro + Vektor

[ctx: AssistantJet_start]
en: Light
target: Lys

[ctx: AssistantJet_start]
en: Proceed
target: Fortsett

[ctx: AssistantJet_start]
en: Rudder
target: Sideror

[ctx: AssistantJet_start]
en: Rudder L
target: Sideror V

[ctx: AssistantJet_start]
en: Rudder R
target: Sideror H

[ctx: AssistantJet_start]
en: Smoke
target: Røyk

[ctx: AssistantJet_start]
en: Tail
target: Hale

[ctx: AssistantJet_start]
en: Throttle + Smoke
target: Throttle + Røyk

[ctx: AssistantJet_start]
en: Vector Elev
target: Vektor høyde

[ctx: AssistantJet_start]
en: Vector Rudd
target: Vektor Side

[ctx: AssistantJet_start]
en: Wing
target: Vinge

[ctx: AssistantJet_start]
en: You did not set any function, the assistant will be closed. A new model with an empty function list will be created.
    Continue?
target: Du har ikke satt opp noen funksjoner, assistenten stenger. En ny modell med en tom funksjonsliste blir laget.
    Fortsett?

[ctx: AssistantJet_vtail_start]
en: Aileron
target: Balanseror

[ctx: AssistantJet_vtail_start]
en: Aileron L
target: Balanseror V

[ctx: AssistantJet_vtail_start]
en: Aileron R
target: Balanseror H

[ctx: AssistantJet_vtail_start]
en: Brake
target: Bremse

[ctx: AssistantJet_vtail_start]
en: Flap
target: Flaps

[ctx: AssistantJet_vtail_start]
en: Flap L
target: Flaps V

[ctx: AssistantJet_vtail_start]
en: Flap R
target: Flaps H

[ctx: AssistantJet_vtail_start]
en: Flight Mode
target: Flightmode

[ctx: AssistantJet_vtail_start]
en: Gear
target: Understell

[ctx: AssistantJet_vtail_start]
en: Gear + Brake
target: Understell + Bremse

[ctx: AssistantJet_vtail_start]
en: Gyro + Vector
target: Gyro + Vektor

[ctx: AssistantJet_vtail_start]
en: Light
target: Lys

[ctx: AssistantJet_vtail_start]
en: Proceed
target: Fortsett

[ctx: AssistantJet_vtail_start]
en: Smoke
target: Røyk

[ctx: AssistantJet_vtail_start]
en: Tail
target: Hale

[ctx: AssistantJet_vtail_start]
en: Throttle + Smoke
target: Throttle + Røyk

[ctx: AssistantJet_vtail_start]
en: V-Tail Ele
target: V-Hale Høyde

[ctx: AssistantJet_vtail_start]
en: V-Tail L
target: V-Hale V

[ctx: AssistantJet_vtail_start]
en: V-Tail R
target: V-Hale H

[ctx: AssistantJet_vtail_start]
en: V-Tail Rudd
target: V-Hale Side

[ctx: AssistantJet_vtail_start]
en: Vector Elev
target: Vektor høyde

[ctx: AssistantJet_vtail_start]
en: Vector Rudd
target: Vektor Side

[ctx: AssistantJet_vtail_start]
en: Wing
target: Vinge

[ctx: AssistantJet_vtail_start]
en: You did not set any function, the assistant will be closed. A new model with an empty function list will be created.
    Continue?
target: Du har ikke satt opp noen funksjoner, assistenten stenger. En ny modell med en tom funksjonsliste blir laget.
    Fortsett?

[ctx: AssistantSail_delta_start]
en: Delta_A-L
target: Delta_A-V

[ctx: AssistantSail_delta_start]
en: Delta_A-R
target: Delta_A-H

[ctx: AssistantSail_delta_start]
en: Delta_A_Ail
target: Delta_A_Bal

[ctx: AssistantSail_delta_start]
en: Delta_A_Ele
target: Delta_A_Høyde

[ctx: AssistantSail_delta_start]
en: Delta_B-L
target: Delta_B-V

[ctx: AssistantSail_delta_start]
en: Delta_B-R
target: Delta_B-H

[ctx: AssistantSail_delta_start]
en: Delta_B_Ail
target: Delta_B_Bal

[ctx: AssistantSail_delta_start]
en: Delta_B_Ele
target: Delta_B_Høyde

[ctx: AssistantSail_delta_start]
en: Flap
target: Flaps

[ctx: AssistantSail_delta_start]
en: Flap-L
target: Flaps-V

[ctx: AssistantSail_delta_start]
en: Flap-R
target: Flaps-H

[ctx: AssistantSail_delta_start]
en: Flight Mode
target: Flightmode

[ctx: AssistantSail_delta_start]
en: Gear
target: Understell

[ctx: AssistantSail_delta_start]
en: Gear-Door
target: Understellsluke

[ctx: AssistantSail_delta_start]
en: Left Wing
target: Venstre vinge

[ctx: AssistantSail_delta_start]
en: Proceed
target: Fortsett

[ctx: AssistantSail_delta_start]
en: Right Wing
target: Høyre vinge

[ctx: AssistantSail_delta_start]
en: Rudder
target: Sideror

[ctx: AssistantSail_delta_start]
en: Rudder-L
target: Sideror-V

[ctx: AssistantSail_delta_start]
en: Rudder-R
target: Sideror-H

[ctx: AssistantSail_delta_start]
en: Tail
target: Hale

[ctx: AssistantSail_delta_start]
en: Throttle + Gear
target: Motor + Understell

[ctx: AssistantSail_delta_start]
en: Tow Hook
target: Slepekrok

[ctx: AssistantSail_delta_start]
en: You did not set any function, the assistant will be closed. A new model with an empty function list will be created.
    Continue?
target: Du har ikke satt opp noen funksjoner, assistenten stenger. En ny modell med en tom funksjonsliste blir laget.
    Fortsett?

[ctx: AssistantSail_start]
en: Aileron
target: Balanseror

[ctx: AssistantSail_start]
en: Aileron L
target: Balanseror V

[ctx: AssistantSail_start]
en: Aileron R
target: Balanseror H

[ctx: AssistantSail_start]
en: Elevator
target: Høyderor

[ctx: AssistantSail_start]
en: Elevator L
target: Høyderor V

[ctx: AssistantSail_start]
en: Elevator R
target: Høyderor H

[ctx: AssistantSail_start]
en: Flap
target: Flaps

[ctx: AssistantSail_start]
en: Flap L
target: Flaps V

[ctx: AssistantSail_start]
en: Flap R
target: Flaps H

[ctx: AssistantSail_start]
en: Flight Mode
target: Flightmode

[ctx: AssistantSail_start]
en: Gear
target: Understell

[ctx: AssistantSail_start]
en: Gear-Door
target: Understellsluke

[ctx: AssistantSail_start]
en: Left Wing
target: Venstre vinge

[ctx: AssistantSail_start]
en: Proceed
target: Fortsett

[ctx: AssistantSail_start]
en: Right Wing
target: Høyre vinge

[ctx: AssistantSail_start]
en: Rudder
target: Sideror

[ctx: AssistantSail_start]
en: Rudder L
target: Sideror V

[ctx: AssistantSail_start]
en: Rudder R
target: Sideror H

[ctx: AssistantSail_start]
en: Spoiler
target: Luftbremse

[ctx: AssistantSail_start]
en: Spoiler L
target: Luftbremse V

[ctx: AssistantSail_start]
en: Spoiler R
target: Luftbremse H

[ctx: AssistantSail_start]
en: Tail
target: Hale

[ctx: AssistantSail_start]
en: Throttle
target: Motor

[ctx: AssistantSail_start]
en: Throttle + Gear
target: Motor + Understell

[ctx: AssistantSail_start]
en: Tow Hook
target: Slepekrok

[ctx: AssistantSail_start]
en: You did not set any function, the assistant will be closed. A new model with an empty function list will be created.
    Continue?
target: Du har ikke satt opp noen funksjoner, assistenten stenger. En ny modell med en tom funksjonsliste blir laget.
    Fortsett?

[ctx: AssistantSail_vtail_start]
en: Aileron
target: Balanseror

[ctx: AssistantSail_vtail_start]
en: Aileron L
target: Balanseror V

[ctx: AssistantSail_vtail_start]
en: Aileron R
target: Balanseror H

[ctx: AssistantSail_vtail_start]
en: Flap
target: Flaps

[ctx: AssistantSail_vtail_start]
en: Flap L
target: Flaps V

[ctx: AssistantSail_vtail_start]
en: Flap R
target: Flaps H

[ctx: AssistantSail_vtail_start]
en: Flight Mode
target: Flightmode

[ctx: AssistantSail_vtail_start]
en: Gear
target: Understell

[ctx: AssistantSail_vtail_start]
en: Gear-Door
target: Understellsluke

[ctx: AssistantSail_vtail_start]
en: Left Wing
target: Venstre vinge

[ctx: AssistantSail_vtail_start]
en: Proceed
target: Fortsett

[ctx: AssistantSail_vtail_start]
en: Right Wing
target: Høyre vinge

[ctx: AssistantSail_vtail_start]
en: Spoiler
target: Luftbremse

[ctx: AssistantSail_vtail_start]
en: Spoiler L
target: Luftbremse V

[ctx: AssistantSail_vtail_start]
en: Spoiler R
target: Luftbremse H

[ctx: AssistantSail_vtail_start]
en: Tail
target: Hale

[ctx: AssistantSail_vtail_start]
en: Throttle
target: Motor

[ctx: AssistantSail_vtail_start]
en: Throttle + Gear
target: Motor + Understell

[ctx: AssistantSail_vtail_start]
en: Tow Hook
target: Slepekrok

[ctx: AssistantSail_vtail_start]
en: V-Tail Ele
target: V-Hale Høyde

[ctx: AssistantSail_vtail_start]
en: V-Tail L
target: V-Hale V

[ctx: AssistantSail_vtail_start]
en: V-Tail R
target: V-Hale H

[ctx: AssistantSail_vtail_start]
en: V-Tail Rudd
target: V-Hale Sideror

[ctx: AssistantSail_vtail_start]
en: You did not set any function, the assistant will be closed. A new model with an empty function list will be created.
    Continue?
target: Du har ikke satt opp noen funksjoner, assistenten stenger. En ny modell med en tom funksjonsliste blir laget.
    Fortsett?

[ctx: AssistantServoChooser]
en: Available servo slots:
target: Tilgjengelige servoplasser:

[ctx: AssistantServoChooser]
en: Please select the servos you would like to add
target: Vennligst velg servoene du vil legge til

[ctx: AssistantServoOptionsBar]
en: Delete
target: Slett

[ctx: ControlConfig2Pos]
en: Control
target: Kontroll

[ctx: ControlConfig2Pos]
en: Off
target: Av

[ctx: ControlConfig2Pos]
en: On
target: På

[ctx: ControlConfig3Pos]
en: Control
target: Kontroll

[ctx: ControlConfig3Pos]
en: Off
target: Av

[ctx: ControlConfig3Pos]
en: On
target: På

[ctx: ControlConfigLinear]
en: Fixed control
target: Fast kontroll

[ctx: ControlConfigLinear]
en: Hysteresis
target: Hysterese

[ctx: ControlConfigLinear]
en: Inverted
target: Invertert

[ctx: ControlConfigLinear]
en: OFF
target: AV

[ctx: ControlConfigLinear]
en: ON
target: PÅ

[ctx: CoordSequenser]
en: backw
target: bakover

[ctx: CoordSequenser]
en: fwd
target: forover

[ctx: CoordSequenserV2]
en: backw
target: bakover

[ctx: CoordSequenserV2]
en: fwd
target: forover

[ctx: CoordSequenserV3]
en: Locked
target: Låst

[ctx: CoordSequenserV3]
en: backw
target: bakover

[ctx: CoordSequenserV3]
en: fwd
target: forover

[ctx: CountrySelector]
en: Time zone [ ±hh:mm ]
target: Tidssone [ ±tt:mm ]

[ctx: CutoffSettings]
en: Actual
target: Faktisk

[ctx: CutoffSettings]
en: Cancel
target: Avbryt

[ctx: CutoffSettings]
en: Control
target: Kontroll

[ctx: CutoffSettings]
en: Delete Servo Cut-off
target: Slett servo cut-off

[ctx: CutoffSettings]
en: Do you really want to delete this Servo Cut-off?
target: Vil du virkelig slette denne servo cut-off?

[ctx: CutoffSettings]
en: Please select an available servo:
target: Vennligst velg en tilgjengelig servo:

[ctx: CutoffSettings]
en: Position
target: Posisjon

[ctx: CutoffSettings]
en: Select servo:
target: Velg servo:

[ctx: CutoffSettings]
en: State
target: Status

[ctx: DiffServoArranger]
en: Function:
target: Funksjon:

[ctx: DiffServoArranger]
en: Left
target: Venstre

[ctx: DiffServoArranger]
en: Right
target: Høyre

[ctx: DifferentialsList]
en: Cancel
target: Avbryt

[ctx: DifferentialsList]
en: Delete
target: Slett

[ctx: DifferentialsList]
en: Diff. value
target: Diff. verdi

[ctx: DifferentialsList]
en: Do you really want to clear this differential?
target: Vil du virkelig slette denne differensialen?

[ctx: DifferentialsList]
en: Function
target: Funksjon

[ctx: DifferentialsList]
en: Left
target: Venstre

[ctx: DifferentialsList]
en: Please assign servos to the left or right side:
target: Vennligst tildele servoer til venstre eller høyre side:

[ctx: DifferentialsList]
en: Please select an available function:
target: Vennligst velg en tilgjengelig funksjon:

[ctx: DifferentialsList]
en: Right
target: Høyre

[ctx: DifferentialsList]
en: Value
target: Verdi

[ctx: EmptyOutroStop]
en: Fast start is not possible next time.
target: Hurtig start er ikke mulig neste gang.

[ctx: EmptyOutroStop]
en: Model Data bad CRC!
target: Modell Data dårlig CRC!

[ctx: EmptyOutroStop]
en: System shutting down
target: System stenger ned

[ctx: ErrorHandler]
en: Cannot delete non-empty folder!
target: Kan ikke slette en mappe som ikke er tom!

[ctx: ErrorHandler]
en: Empty input not allowed
target: Tom verdi ikke tillatt

[ctx: ErrorHandler]
en: Error:
    Unknown Error, Errorcode:
target: Feil:
    Ukjent feil, Feilkode:

[ctx: ErrorHandler]
en: File of the active model cannot be modified!
target: Filen for aktiv modell kan ikke endres!

[ctx: ErrorHandler]
en: Function don't exist.
target: Funksjon finnes ikke.

[ctx: ErrorHandler]
en: General Error
    
    No errortext defined.
target: Generell feil
    
    Ingen feilkode finnes.

[ctx: ErrorHandler]
en: General error occured.
target: Ukjent feil har oppstått.

[ctx: ErrorHandler]
en: Index off the limits.
target: Indeks utenfor grenseverdiene.

[ctx: ErrorHandler]
en: Installed software is already up-to-date.
target: Nyeste versjon er allerede installert.

[ctx: ErrorHandler]
en: More than one control recognized
target: Mer enn en kontroll registrert

[ctx: ErrorHandler]
en: No USB device detected. Please connect USB device and try again.
target: Ingen USB enhet funnet. Vennligst koble  til en USB enhet og forsøk igjen.

[ctx: ErrorHandler]
en: No Update.xml file is found on the USB device.
target: Ingen Update.xml file ligger på denne USB enheten.

[ctx: ErrorHandler]
en: No movement detected.
target: Ingen bevegelse er registrert.

[ctx: ErrorHandler]
en: No telemetry control can be assigned as an input of this VS, since this VS controls another telemetry control!
target: Ingen telemetrifunksjon kan tildeles som input til denne VS, siden den allerede styrer en annen telemetrifunksjon!

[ctx: ErrorHandler]
en: Not yet implemented.
target: Ikke implementert ennå.

[ctx: ErrorHandler]
en: Reached maximum Flight Mode count.
target: Maks. antall flightmodes er passert.

[ctx: ErrorHandler]
en: Reached maximum curves.
target: Maks. antall kurver er passert.

[ctx: ErrorHandler]
en: Reached maximum entry count.
target: Maks. antall inntastinger er passert.

[ctx: ErrorHandler]
en: Reached maximum function count.
target: Maks. antall funksjoner er passert.

[ctx: ErrorHandler]
en: Reached maximum limit count.
target: Maks. antall grenseverdier er passert.

[ctx: ErrorHandler]
en: Reached maximum mixer count.
target: Maks. antall miksere er passert.

[ctx: ErrorHandler]
en: Reached maximum number of functions that can control this servo.
target: Maksimum antall funksjoner som kan styre denne servo er nådd.

[ctx: ErrorHandler]
en: Reached maximum of sensors.
target: Maks. antall sensorer er passert.

[ctx: ErrorHandler]
en: Reached maximum of telemetry controls.
target: Maksimum antall telemetrifunksjoner.

[ctx: ErrorHandler]
en: Reached maximum of timers.
target: Maks. antall timere er passert.

[ctx: ErrorHandler]
en: Reached maximum of virtual switches.
target: Maksimalt antall virtuelle brytere er nådd.

[ctx: ErrorHandler]
en: Reached maximum of widgets.
target: Maks. antall widgeter er passert.

[ctx: ErrorHandler]
en: Reached maximum sequencer count.
target: Maks. antall sekvenser er passert.

[ctx: ErrorHandler]
en: Reached maximum servo config count.
target: Maks. antall servokonfigurasjoner er passert.

[ctx: ErrorHandler]
en: Reached maximum servos per function.
target: Maks. antall servoer pr funksjon er passert.

[ctx: ErrorHandler]
en: Sensor not in use.
target: Sensor ikke i bruk.

[ctx: ErrorHandler]
en: Servo already in use.
target: Servo allerede i bruk.

[ctx: ErrorHandler]
en: Servo not assigned.
target: Servo ikke tildelt.

[ctx: ErrorHandler]
en: Servo not used.
target: Servo ikke i bruk.

[ctx: ErrorHandler]
en: This control is already assigned as a channel Core control. Please select another control!
target: Denne kontrollen er allerede tilordnet som en kanal Core kontroll. Vennligst velg en annen kontroll!

[ctx: ErrorHandler]
en: This control is already assigned as an input of FM/Sequencer/Servo-Cut/Mixer/Vario control virtual switch. Please select another control!
target: Denne kontrollen er allerede tilordnet som en input til FM/Servo-kuttT/Mikser/Vario virtuellbryter. Vennligst velg en annen kontroll!

[ctx: ErrorHandler]
en: This control is already assigned to Trainer cord switch. Please select another control!
target: Denne kontrollen er allerede tilordnet som en skolekabelbryter. Vennligst velg en annen kontroll!

[ctx: ErrorHandler]
en: This item cannot be deleted.
target: Dette objektet kan ikke slettes.

[ctx: ErrorHandler]
en: This name is already being used.
target: Navnet finnes allerede.

[ctx: ErrorHandler]
en: Unknown control
target: Ukjent kontroll

[ctx: ErrorHandler]
en: Widget not used.
target: Widget ikke i bruk.

[ctx: FileManager]
en: 
    Proceed?
target: 
    Fortsett?

[ctx: FileManager]
en: Cannot unmount USB device
target: Kan ikke demontere USB enhet

[ctx: FileManager]
en: Capacity:
target: Kapasitet:

[ctx: FileManager]
en: Content
target: Innhold

[ctx: FileManager]
en: Do you really want to delete selected files?
target: Vil du virkelig slette de valgte filene?

[ctx: FileManager]
en: File system:
target: Filsystem:

[ctx: FileManager]
en: Free:
target: Ledig:

[ctx: FileManager]
en: Label:
target: Etikett:

[ctx: FileManager]
en: Source
target: Kilde

[ctx: FileManager]
en: USB device
target: USB enhet

[ctx: FileManager]
en: Unmount USB device?
target: Koble ut USB enheten?

[ctx: FileManager]
en: Used:
target: Brukt:

[ctx: FileManager]
en: has been properly unmounted!
target: har blitt korrekt demontert!

[ctx: FileSelector]
en: Battery low - please charge before update!
target: Lav batterispenning - vennligst lad før oppdatering!

[ctx: FileSelector]
en: Cancel
target: Avbryt

[ctx: FileSelector]
en: Details
target: Detaljer

[ctx: FileSelector]
en: Done
target: Ferdig

[ctx: FileSelector]
en: File Info:
target: File info:

[ctx: FileSelector]
en: None
target: Ingen

[ctx: FileSelector]
en: Please
    select
    the
    receiver
    type
target: Vennligst
    velg
    mottaker
    type

[ctx: FileSelector]
en: Please select the software version:
target: Vennligst velg software versjon:

[ctx: FileSelector]
en: Receiver
target: Mottaker

[ctx: FileSelector]
en: Recovery Mode
target: Gjenopprettingsmodus

[ctx: FileSelector]
en: Update
target: Oppdater

[ctx: FileSelector]
en: Update is successful
    for receiver
target: Oppdatering av mottaker
    er vellykket

[ctx: FileSelector]
en: Update of receiver
target: Oppdatering mottaker

[ctx: FileSelector]
en: Update terminated
    for receiver
target: Oppdatering avmottaker
    er avbrutt

[ctx: FlightModeEditor]
en: 
    Standard flightmode should be created first!
target: 
    Standard flightmode må opprettes først!

[ctx: FlightModeEditor]
en: Cancel
target: Avbryt

[ctx: FlightModeEditor]
en: Delete Flight Mode
target: Slett Flightmode

[ctx: FlightModeEditor]
en: Delete Function
target: Slett funksjon

[ctx: FlightModeEditor]
en: Do you really want to delete
    this Flight Mode?
target: Vil du virkelig slette
    denne Flightmode?

[ctx: FlightModeEditor]
en: Do you really want to delete this
    No-Fade-in function?
target: Vil du virkelig slette denne
    No-Fade-In funksjonen?

[ctx: FlightModeEditor]
en: Flight Mode
target: Flightmode

[ctx: FlightModeEditor]
en: Please select available functions:
target: Vennligst velg tilgjengelige funksjoner:

[ctx: FlightModeItem]
en: Off
target: Av

[ctx: FlightModeSelector]
en: 
    Cannot delete standard Flight Mode!
target: 
    Kan ikke slette standard Flight mode!

[ctx: FlightModeSelector]
en: 
    Standard flightmode should be created first!
target: 
    Standard flightmode må opprettes først!

[ctx: FlightModeSelector]
en: Copy
target: Kopiere

[ctx: FlightModeSelector]
en: Delete FM Control
target: Slett FM Kontroll

[ctx: FlightModeSelector]
en: Delete Flight Mode
target: Slett Flightmode

[ctx: FlightModeSelector]
en: Do you really want to delete
    this Flight Mode?
target: Vil du virkelig slette
    denne Flightmode?

[ctx: FlightModeSelector]
en: Do you really want to delete this
    FM control?
target: Vil du virkelig slette denne
    FM kontroll?

[ctx: FlightModeSelector]
en: Model:
target: Modell:

[ctx: FlightModeSelector]
en: Null string
target: Null streng

[ctx: FlightModeSelector]
en: Swap
target: Bytte

[ctx: FuncDiffSettings]
en: Diff. control
target: Diff. kontroll

[ctx: FuncDiffSettings]
en: Differential
target: Differensial

[ctx: FuncDiffSettings]
en: Function
target: Funksjon

[ctx: FuncDiffSettings]
en: Function:
target: Funksjon:

[ctx: FuncDiffSettings]
en: Single
target: Singel

[ctx: FuncDiffSettings]
en: View
target: Visning

[ctx: FunctionItem]
en: Off
target: Av

[ctx: ImageViewer]
en: Close
target: Lukk

[ctx: ImageViewer]
en: Crop
target: Beskjær

[ctx: ImageViewer]
en: Delete
target: Slett

[ctx: ImageViewer]
en: Save
target: Lagre

[ctx: Keyboard]
en: Space
target: Mellomrom

[ctx: Menu]
en: Checklist
target: Sjekkliste

[ctx: Menu]
en: Controls
target: Kontroller

[ctx: Menu]
en: Differential
target: Differensial

[ctx: Menu]
en: Flight Modes
target: Flightmoder

[ctx: Menu]
en: Functions
target: Funksjoner

[ctx: Menu]
en: Mixer
target: Mikser

[ctx: Menu]
en: Model
target: Modell

[ctx: Menu]
en: Receiver
target: Mottaker

[ctx: Menu]
en: Sequencers
target: Sequencere

[ctx: Menu]
en: ServoMonitor
target: Servo Monitor

[ctx: Menu]
en: Servos
target: Servoer

[ctx: Menu]
en: Settings
target: Innstillinger

[ctx: Menu]
en: Switches
target: Brytere

[ctx: Menu]
en: Telemetry
target: Telemetri

[ctx: Menu]
en: Trainer cord
target: Skolekabel

[ctx: Menu]
en: Virtual
target: Virtuelle

[ctx: Menu]
en: Voice
target: Tale

[ctx: ModelMenu]
en: 
    Proceed?
target: 
    Fortsett?

[ctx: ModelMenu]
en: Cannot save model file
target: Kan ikke lagre modellfilen

[ctx: ModelMenu]
en: Changed
target: Endret

[ctx: ModelMenu]
en: Copy
target: Kopiere

[ctx: ModelMenu]
en: Delete
target: Slette

[ctx: ModelMenu]
en: Do you really want to reset Model time?
target: Vil du virkelig nullstille modell tid?

[ctx: ModelMenu]
en: Export
target: Eksportere

[ctx: ModelMenu]
en: Folder
target: Mappe

[ctx: ModelMenu]
en: Image
target: Bilde

[ctx: ModelMenu]
en: Load
target: Laste

[ctx: ModelMenu]
en: Model export canceled!
target: Eksport av modell avbrutt!

[ctx: ModelMenu]
en: Model file
target: Modellfile

[ctx: ModelMenu]
en: Model successfully exported!
target: Eksport av modell vellykket!

[ctx: ModelMenu]
en: Modelname
target: Modellnavn

[ctx: ModelMenu]
en: Modeltime
target: Modell tid

[ctx: ModelMenu]
en: Name
target: Navn

[ctx: ModelMenu]
en: New Folder
target: Ny mappe

[ctx: ModelMenu]
en: New folder creation error.
target: Feil ved opprttelse av ny mappe.

[ctx: ModelMenu]
en: Paste
target: Lim inn

[ctx: ModelMenu]
en: Rename Folder
target: Endre navn på mappe

[ctx: ModelMenu]
en: SD card is full or write protected!
target: SD-kort er fullt eller skrivebeskyttet!

[ctx: ModelMenu]
en: This folder is now in use and cannot be deleted!
target: Denne mappen er i bruk og kan ikke slettes!

[ctx: ModelMenu]
en: You are about to delete folder
target: Du er i ferd med å slette mappe

[ctx: ModelMenu]
en: You are about to delete the following model:
target: Du er i ferd med å slette følgende modell:

[ctx: ModelMenu]
en: and all its content. Proceed?
target: og alt innhold. Fortsette?

[ctx: ModelMenu]
en: has been created!
target: har blitt laget!

[ctx: ModelMenu]
en: saving...
target: lagrer...

[ctx: ModelTypeChoose]
en: Delta-Wing
target: Deltavinge

[ctx: ModelTypeChoose]
en: No
target: Nei

[ctx: ModelTypeChoose]
en: Please select the model type:
target: Vennligst velg modelltype:

[ctx: ModelTypeChoose]
en: Proceed
target: Fortsett

[ctx: ModelTypeChoose]
en: V-Tail
target: V-Hale

[ctx: ModelTypeChoose]
en: Yes
target: Ja

[ctx: Modelbuilder]
en: Done
target: Ferdig

[ctx: Modelbuilder]
en: Done(5)
target: Ferdig (5)

[ctx: Modelbuilder]
en: Functions
target: Funksjoner

[ctx: Modelbuilder]
en: Servos
target: Servoer

[ctx: PBX_ComplexTimer]
en: hour
target: time

[ctx: PBX_ComplexTimer]
en: hours
target: timer

[ctx: PBX_ComplexTimer]
en: minute
target: minutt

[ctx: PBX_ComplexTimer]
en: minutes
target: minutter

[ctx: PBX_ComplexTimer]
en: second
target: sekund

[ctx: PBX_ComplexTimer]
en: seconds
target: sekunder

[ctx: PBX_CopyModelData]
en: Add and replace files in destination folder:
target: Legg til og erstatte filer i målmappe:

[ctx: PBX_CopyModelData]
en: The file already exists in the target folder, overwrite?
target: Filen finnes allerede i målmappen, skriv over?

[ctx: PBX_CopyModelData]
en: The following file was already deleted!
target: Følgende file var allerede slettet!

[ctx: PBX_ErrorData]
en: Bad function index in servomixer!
target: Dårlig funksjonsindeks i servomikser!

[ctx: PBX_ErrorData]
en: Bad servoindex or mixerindex in servoconfiguration!
target: Dårlig servoindeks eller mikserindeks i servokonfigurering!

[ctx: PBX_ErrorData]
en: Battery is weak - please charge before update!
target: Batteriet er dårlig - Vennligst lade opp før oppdateringen!

[ctx: PBX_ErrorData]
en: Cannot delete file or folder!
target: Kan ikke slette file eller mappe!

[ctx: PBX_ErrorData]
en: Model currently active – cannot erase!
target: Modellen er aktiv – kan ikke slette!

[ctx: PBX_ErrorData]
en: No USB stick plugged – cannot copy!
target: Ingen USB minnepinne innsatt - kan ikke kopiere!

[ctx: PBX_ErrorData]
en: No destination folder!
target: Ingen målmappe!

[ctx: PBX_ErrorData]
en: No receiver found!
target: Ingen mottaker funnet!

[ctx: PBX_ErrorData]
en: No source file selected – cannot copy!
target: Ingen kildefil finnes - kan ikke kopiere!

[ctx: PBX_ErrorData]
en: No source folder!
target: INgen kildemappe!

[ctx: PBX_ErrorData]
en: Servo configuration not used!
target: Servokonfigurering ikke brukt!

[ctx: PBX_ErrorData]
en: Target file already exists – cannot copy!
target: Mål file finnes allerede - kan ikke kopiere!

[ctx: PBX_ErrorData]
en: This unit cannot be loaded!
target: Denne enheten kan ikke lastes!

[ctx: PBX_ErrorData]
en: Wrong function count in flightmode!
target: Feil oppsett av teller i flightmode!

[ctx: PBX_ErrorData]
en: Wrong setup count in functions!
target: Feil oppsett av teller i funksjoner!

[ctx: PBX_ErrorData]
en: Wrong setup count in mixers!
target: Feil i oppsett av teller i miksere!

[ctx: PBX_ProcessCore]
en: Calibrating controls
target: Kalibrerer kontroller

[ctx: PBX_ProcessCore]
en: Capture sensor menue data
target: Innhent sensor menydata

[ctx: PBX_ProcessCore]
en: Capture telemetrie data
target: Innhent telemetridata

[ctx: PBX_ProcessCore]
en: Copy model
target: Kopier modell

[ctx: PBX_ProcessCore]
en: Copy model data to external device
target: Kopiere modelldata til ekstern enhet

[ctx: PBX_ProcessCore]
en: Deleting model
target: Sletter modell

[ctx: PBX_ProcessCore]
en: Deleting unit
target: Sletter enhet

[ctx: PBX_ProcessCore]
en: Generating new model
target: Genererer ny modell

[ctx: PBX_ProcessCore]
en: Loading model
target: Laster modell

[ctx: PBX_ProcessCore]
en: Loading unit
target: Laster enhet

[ctx: PBX_ProcessCore]
en: Onboard firmware update
target: Onboard firmware oppdatering

[ctx: PBX_ProcessCore]
en: Read menu data continiously
target: Les menydata kontinuerlig

[ctx: PBX_ProcessCore]
en: Receiving modeldata
target: Mottar modelldata

[ctx: PBX_ProcessCore]
en: Renaming model
target: Endrer navn på modell

[ctx: PBX_ProcessCore]
en: Sending binding configuration
target: Sender bindingskonfigurasjon

[ctx: PBX_ProcessCore]
en: Set sensor data
target: Sett sensordata

[ctx: PBX_ProcessCore]
en: Set sensor mainadress
target: Sett sensor hovedadresse

[ctx: PBX_ProcessCore]
en: Software update
target: Oppdatering software

[ctx: PBX_ProcessCore]
en: System synchronization
target: Systemsynkronisering

[ctx: PBX_ProcessCore]
en: System update
target: Systemoppdatering

[ctx: PBX_RuntimeCalcAlarm]
en: Warning
target: Advarsel

[ctx: PBX_RuntimeCalcAlarm]
en: amps
target: ampere

[ctx: PBX_RuntimeCalcAlarm]
en: attention
target: obs

[ctx: PBX_RuntimeCalcAlarm]
en: expired
target: Utløpt

[ctx: PBX_RuntimeCalcAlarm]
en: feet per second
target: fot pr sekund

[ctx: PBX_RuntimeCalcAlarm]
en: meters per second
target: meter pr sekund

[ctx: PBX_RuntimeCalcAlarm]
en: milliampere-hours
target: milliampere-timer

[ctx: PBX_RuntimeCalcAlarm]
en: milliamps
target: milliampere

[ctx: PBX_RuntimeCalcAlarm]
en: millivolts
target: millivolt

[ctx: PBX_RuntimeCalcAlarm]
en: volts
target: volt

[ctx: PBX_Timer]
en: hour
target: time

[ctx: PBX_Timer]
en: hours
target: timer

[ctx: PBX_Timer]
en: minute
target: minutt

[ctx: PBX_Timer]
en: minutes
target: minutter

[ctx: PBX_Timer]
en: second
target: sekund

[ctx: PBX_Timer]
en: seconds
target: sekunder

[ctx: PBX_TimersAlarms]
en: Attention:data synchronization failed!Please land your aircraft!
target: Advarsel:datasynkronisering feiler!Vennligst land modellen!

[ctx: PreflightChecklist]
en: Control
target: Kontroll

[ctx: PreflightChecklist]
en: Disabled
target: Deaktivert

[ctx: PreflightChecklist]
en: Enabled
target: Aktivert

[ctx: PreflightChecklist]
en: Off
target: Av

[ctx: PreflightChecklist]
en: On
target: På

[ctx: PreflightChecklist]
en: Position
target: Posisjon

[ctx: PreflightChecklist]
en: Preflight Checklist
target: Preflight sjekkliste

[ctx: PreflightChecklist]
en: Selection
target: Utvalg

[ctx: PreflightChecklist]
en: Teach
target: Lær

[ctx: PreflightChecklist]
en: Teach controls
target: Lær kontroller

[ctx: QuestionBox]
en: Add
target: Legg til

[ctx: QuestionBox]
en: Cancel
target: Avbryt

[ctx: QuestionBox]
en: Reset
target: Nullstill

[ctx: QuestionBox]
en: Skip
target: Avslå

[ctx: QuestionBox]
en: Unmount
target: Demonter

[ctx: ReplayTypeSelector]
en: One shot
target: En gang

[ctx: ReplayTypeSelector]
en: Replay settings
target: Replay instillinger

[ctx: ReplayTypeSelector]
en: Text message:
target: Tekstmelding:

[ctx: ReplayTypeSelector]
en: Time interval
target: Tidsintervall

[ctx: ReplayTypeSelector]
en: Value change
target: Endring verdi

[ctx: SensorAddressInfo]
en: Address:
target: Adresse:

[ctx: SensorAddressInfo]
en: Close
target: Lukk

[ctx: SensorAddressInfo]
en: Page:
target: Side:

[ctx: SensorMenuItem]
en: Activate
target: Aktiver

[ctx: SensorMenuItem]
en: Deactivate
target: Deaktiver

[ctx: SequencerItem]
en: Single
target: Singel

[ctx: SequencerServoEditor]
en: Add
target: Legg til

[ctx: SequencerServoEditor]
en: Backward
target: Bakover

[ctx: SequencerServoEditor]
en: Forward
target: Forover

[ctx: SequencerServoEditor]
en: Point
target: Punkt

[ctx: SequencerServoEditor]
en: Position
target: Posisjon

[ctx: SequencerServoEditor]
en: Remove
target: Fjern

[ctx: SequencerServoEditor]
en: Running
target: Kjører

[ctx: SequencerServoEditor]
en: Select point
target: Velg punkt

[ctx: SequencerServoEditor]
en: Time
target: Tid

[ctx: SequencerServoList]
en: Active time
target: Aktiv tid

[ctx: SequencerServoList]
en: Cancel
target: Avbryt

[ctx: SequencerServoList]
en: Delete
target: Slett

[ctx: SequencerServoList]
en: Dir.
target: Retn.

[ctx: SequencerServoList]
en: Do you really want to delete this servo from sequencer?
target: Vil du virkelig slette dnne servoen fra sequensere?

[ctx: SequencerServoList]
en: Movement range
target: Utslag rekkevidde

[ctx: SequencerServoList]
en: Please select available servos:
target: Vennligst velg tilgjengelige servoer:

[ctx: SequencerServoList]
en: Select servo:
target: Velg servo:

[ctx: SequencersList]
en: Cancel
target: Avbryt

[ctx: SequencersList]
en: Control
target: Kontroll

[ctx: SequencersList]
en: Delete
target: Slett

[ctx: SequencersList]
en: Do you really want to delete this sequencer?
target: Vil du virkelig slette denne sequenceren?

[ctx: SequencersList]
en: Mode
target: Type

[ctx: SequencersList]
en: Name
target: Navn

[ctx: SequencersList]
en: Please select available servos:
target: Vennligst velg en tilgjengelig servo:

[ctx: SequencersList]
en: Select servo:
target: Velg servo:

[ctx: SequencersList]
en: Sequencer is running. Try again when finished!
target: Sequencer kjører. Forsøk igjen når den er ferdig!

[ctx: SequencersList]
en: Servos
target: Servoer

[ctx: SequencersList]
en: Setup
target: Oppsett

[ctx: ServoCurveEditor]
en: Function:
target: Funksjon:

[ctx: ServoCurveEditor]
en: Points
target: Punkter

[ctx: ServoCurveEditor]
en: Raw
target: Rå

[ctx: ServoCurveEditor]
en: Reset Curve
target: Nullstill kurve

[ctx: ServoCurveEditor]
en: Select Point
target: Velg punkt

[ctx: ServoCurveEditor]
en: Smooth
target: Jevn

[ctx: ServoCurveEditor]
en: Value
target: Verdi

[ctx: ServoCurveSettings]
en: Center
target: Senter

[ctx: ServoCurveSettings]
en: Curve Editor
target: Kurveeditor

[ctx: ServoCurveSettings]
en: Edit
target: Editere

[ctx: ServoCurveSettings]
en: Function:
target: Funksjon:

[ctx: ServoCurveSettings]
en: Result curve
target: Resultat kurve

[ctx: ServoCurveSettings]
en: View
target: Visning

[ctx: ServoCutOffItem]
en: OFF
target: AV

[ctx: ServoCutOffItem]
en: ON
target: PÅ

[ctx: ServoItemV2]
en: Reset curve
target: Nullstill kurve

[ctx: SetupMenu]
en: Appearance
target: Skjerm

[ctx: SlideIn]
en: Delete
target: Slett

[ctx: SlideIn]
en: Reset
target: Nullstill

[ctx: SoftwareInfo]
en: 
    Nothing to install!
target: 
    Ingenting å installere!

[ctx: SoftwareInfo]
en: 
    Voice server cannot run. Please reboot the Core!
    
    .
target: Taleserver kan ikke kjøre. Vennligst restarte Core!
    
    .

[ctx: SoftwareInfo]
en: 
    Voice server stopped
    
    .
target: 
    Taleserver stoppet
    
    .

[ctx: SoftwareInfo]
en: 
    Voices data corrupted. Not installed!
target: 
    Taledata er korrupt.Ikke installert!

[ctx: SoftwareInfo]
en: 
    Voices have been installed!
target: Talestemmer er installert!

[ctx: SoftwareInfo]
en: Application
target: Applikasjon

[ctx: SoftwareInfo]
en: Battery low - please charge before update!
target: Lav batterispenning - vennligst lad før oppdatering!

[ctx: SoftwareInfo]
en: Connecting to WLAN... Please, wait!
target: Kobler til WLAN... Vennligst vent!

[ctx: SoftwareInfo]
en: CoreStart script
target: Core Start script

[ctx: SoftwareInfo]
en: Do you really want to enter recovery mode?
     The radio link will turned off.
target: Vil du virkelig gå i gjenopprettingsmodus?
     Radio forbindelsen blir slått av.

[ctx: SoftwareInfo]
en: Do you really want to recover SC firmware?
target: Vil du virkelig gjenoprette SC firmware?

[ctx: SoftwareInfo]
en: Do you really want to recover TC firmware?
target: Vil du virkelig gjenoprette TC firmware?

[ctx: SoftwareInfo]
en: Do you want to download the Update from Internet?
target: Vil du laste ned oppdateringen fra internett?

[ctx: SoftwareInfo]
en: Downloading
    .
target: Laster ned
    .

[ctx: SoftwareInfo]
en: File Update.xml must be the same version as this application!
target: Filen Update.xml må være samme versjon som denne applikasjon!

[ctx: SoftwareInfo]
en: Firmware recovery
target: Gjenopprett firmware

[ctx: SoftwareInfo]
en: Load
target: Laste

[ctx: SoftwareInfo]
en: MD5 sum doesn't match!
     Please download the Update again!
target: MD5 sum matcher ikke!
     Vennligst last ned oppdatering på nytt!

[ctx: SoftwareInfo]
en: Network connection error!
    Check WLAN connection to the Internet!
target: Nettverksproblem!
    Sjekk WLAN forbindelsen til internett!

[ctx: SoftwareInfo]
en: No WLAN settings are given by user!
    Please configure it in WLAN menu.
target: Ingen WLAN innstillinger finnes for denne bruker!
    Vennligst konfigurere dette i WLAN menyen.

[ctx: SoftwareInfo]
en: No free space on SD card for the update package!
target: Ikke nok ledig plass på SD-kort for oppdateringspakken!

[ctx: SoftwareInfo]
en: No response from PowerBox server or weak connection!
target: Ikke noe svar fra Powerbox server eller en svak forbindelse!

[ctx: SoftwareInfo]
en: No source folder is selected for the update.
    Update canceled!
target: Ingen kildemappe er valgt for oppdateringen.
    Oppdatering avbrutt!

[ctx: SoftwareInfo]
en: Operating system
target: Operativsystem

[ctx: SoftwareInfo]
en: Please wait!
    Copying application files
    
    .
target: Vennligst vent!
    Kopierer appliksjonsfiler
    
    .

[ctx: SoftwareInfo]
en: Please wait!
    Copying voice packages
    
    .
target: Vennligst vent!
    Kopierer lydpakker
    
    .

[ctx: SoftwareInfo]
en: Please wait!
    Executing Epilog shell script
    
    .
target: Vennligst vent!
    Kopierer epilog shell script
    
    .

[ctx: SoftwareInfo]
en: Please wait!
    Executing Prolog shell script
    
    .
target: Vennligst vent!
    Kjører prolog shell script
    
    .

[ctx: SoftwareInfo]
en: Please wait!
    Unpacking voice packages
    
    .
target: Vennligst vent!
    Pakker ut tale pakker
    
    .

[ctx: SoftwareInfo]
en: Please wait!
    Voice server starting
    
    .
target: Vennligst vent!
    Taleserver starter
    
    .

[ctx: SoftwareInfo]
en: Please wait!
    Voice server stopping
    
    .
target: Vennligst vent!
    Lydserver stopper
    
    .

[ctx: SoftwareInfo]
en: Ready for update!
    - Turn off your model.
    - Restart the Core.
target: Klar for oppdatering!
    - Skru av modellen.
    - Restart Core.

[ctx: SoftwareInfo]
en: Receiver A
target: Mottaker A

[ctx: SoftwareInfo]
en: Receiver B
target: Mottaker B

[ctx: SoftwareInfo]
en: Receiver C
target: Mottaker C

[ctx: SoftwareInfo]
en: Receiver D
target: Mottaker D

[ctx: SoftwareInfo]
en: Run
target: Kjør

[ctx: SoftwareInfo]
en: Stickcontroller
target: Stikkekontroller

[ctx: SoftwareInfo]
en: The actual firmware of the receiver is the latest.
    Proceed anyway?
target: Aktuell firmware på mottaker er siste utgave.
    Fortsett allikevel?

[ctx: SoftwareInfo]
en: Transceiver
target: Tranceiver

[ctx: SoftwareInfo]
en: Update
target: Oppdater

[ctx: SoftwareInfo]
en: Update downloaded successfully! Do you want to install it?
target: Oppdateringen ble korrekt nedlastet! VIl du installere den?

[ctx: SoftwareInfo]
en: Voice packages
target: Talestemme pakker

[ctx: TeleWidgetsVoiceSettings]
en: Global telemetry widget voice settings
target: Globale telemetri widget stemmeinnstillinger

[ctx: TeleWidgetsVoiceSettings]
en: Telemetry alarms
target: Telemetri alarmer

[ctx: TeleWidgetsVoiceSettings]
en: Telemetry status alarms
target: Telemetri status alarmer

[ctx: TeleWidgetsVoiceSettings]
en: Telemetry warnings
target: Telemetri advarsler

[ctx: TelemetryContainerSetup]
en: Containername
target: Beholdernavn

[ctx: TelemetryContainerSetup]
en: Sensorvalue
target: Sensorverdi

[ctx: TelemetryContainerSetup]
en: Setup
target: Oppsett

[ctx: TelemetryContainerSlaveSetup]
en: Close
target: Lukk

[ctx: TelemetryContainerSlaveSetup]
en: Text
target: Tekst

[ctx: TelemetryControlItem]
en: Error
target: Feil

[ctx: TelemetryControlSett2]
en: Actual parameters of the sensor value don't match to settings of this control! Probably another sensor is used. Please reassign the sensor again!
target: Angitte parametere for sensorverdier matcher ikke verdiene til denne funksjonen. Sannsynligvis er en annen  i bruk. Vennligst tildele sensor på nytt!

[ctx: TelemetryControlSett2]
en: Control
target: Kontroll

[ctx: TelemetryControlSett2]
en: Decimal point separator of this telemetry control is incorrect! Please rescan sensors and assign a sensor again!
target: Desimaltegn til denne telmetrifunksjonen er feil! Vennligst rescan sensorene og tildel en sansor på nytt!

[ctx: TelemetryControlSett2]
en: Error
target: Feil

[ctx: TelemetryControlSett2]
en: Inverse
target: Invertert

[ctx: TelemetryControlSett2]
en: Limiter
target: Begrensning

[ctx: TelemetryControlSett2]
en: Off
target: Av

[ctx: TelemetryControlSett2]
en: Source
target: Kilde

[ctx: TelemetryControlSettings]
en: Actual parameters of the sensor value don't match to settings of this control! Probably another sensor is used! Please reassign the sensor again!
target: Angitte parametere for sensorverdier matcher ikke verdiene til denne funksjonen. Sannsynligvis er en annen i bruk. Vennligst tildele sensor på nytt!

[ctx: TelemetryControlSettings]
en: Decimal point separator of this telemetry control is set incorrect! Please reassign the sensor!
target: Desimaltegn til denne telmetrifunksjonen er feil! Vennligst tildel en sansor på nytt!

[ctx: TelemetryControlSettings]
en: Invalid
target: ugyldig

[ctx: TelemetryControlSettings]
en: Limiter
target: Begrensning

[ctx: TelemetryControlSettings]
en: Source
target: Kilde

[ctx: TelemetryControlSettings]
en: Telemetry
target: Telemetri

[ctx: TelemetryControlSettings]
en: control
target: kontroll

[ctx: TelemetryControls]
en: 
    Proceed?
target: 
    Fortsett?

[ctx: TelemetryControls]
en: Delete
target: Slett

[ctx: TelemetryControls]
en: Name
target: Navn

[ctx: TelemetryControls]
en: Source
target: Kilde

[ctx: TelemetryControls]
en: You are about to delete the following telemetry contol:
target: Du er i ferd med å slette følgende telemetrifunksjon:

[ctx: TelemetrySensorAlarmConfig]
en: Beep
target: Bip

[ctx: TelemetrySensorAlarmConfig]
en: No Alarm
target: Ingen alarm

[ctx: TelemetrySensorAlarmConfig]
en: None
target: Ingen

[ctx: TelemetrySensorAlarmConfig]
en: One shot
target: Ett forsøk

[ctx: TelemetrySensorAlarmConfig]
en: Repetitive
target: Gjentagende

[ctx: TelemetrySensorAlarmConfig]
en: Spch+Beep+Vib.
target: Tale + bip Vibr.

[ctx: TelemetrySensorAlarmConfig]
en: Speech + Beep
target: Tale + Bip

[ctx: TelemetrySensorAlarmConfig]
en: Speech + Vib.
target: Tale+ Vibr.

[ctx: TelemetrySensorAlarmConfig]
en: Speech only
target: Kun tale

[ctx: TelemetrySensorAlarmConfig]
en: Vibration
target: Vibrasjon

[ctx: TelemetrySensorAlarmConfig]
en: Warning
target: Advarsel

[ctx: TelemetrySensorMainMenu]
en: Cancel
target: Avbryt

[ctx: TelemetrySensorMainMenu]
en: Next
target: Neste

[ctx: TelemetrySensorMainMenu]
en: No response from Backend!
target: Ikke noe svar fra backend!

[ctx: TelemetrySensorMainMenu]
en: Prev.
target: Forrige.

[ctx: TelemetrySensorMainMenu]
en: Scanning for Menu...
target: Scanner etter Meny...

[ctx: TelemetryValueInformation]
en: Close
target: Lukk

[ctx: TelemetryValueInformation]
en: Reset Alerts
target: Nullstill varsler

[ctx: TelemetryValueInformation]
en: Reset Values
target: Nullstill verdier

[ctx: TelemetryValueInformation]
en: Sensor Information
target: Sensorinformasjon

[ctx: TelemetryValueInformationItem]
en: Reset
target: Nullstill

[ctx: TelemetryWidgetChooser]
en: Notes
target: Notater

[ctx: TelemetryWidgetChooser]
en: QuickLink
target: Hurtigvalg

[ctx: TelemetryWidgetChooser]
en: Select a Widget type to add
target: Velg en Widgettype å legge til

[ctx: TelemetryWidgetChooser]
en: Telemetry
target: Telemetri

[ctx: TelemetryWidgetLabelSetup]
en: Delete Widget
target: Slett Widget

[ctx: TelemetryWidgetLabelSetup]
en: Large
target: Stor

[ctx: TelemetryWidgetLabelSetup]
en: Notes
target: Notater

[ctx: TelemetryWidgetLabelSetup]
en: Size
target: Størrelse

[ctx: TelemetryWidgetLabelSetup]
en: Small
target: Liten

[ctx: TelemetryWidgetLabelSetup]
en: You are about to delete this widget.
    Proceed?
target: Du er i ferd med å slette denne widgeten.
    Fortsett?

[ctx: TelemetryWidgetQuickLink]
en: Select Entry
target: Velg inngang

[ctx: TelemetryWidgetQuickLinkSetup]
en: Delete Widget
target: Slett Widget

[ctx: TelemetryWidgetQuickLinkSetup]
en: Large
target: Stor

[ctx: TelemetryWidgetQuickLinkSetup]
en: Menu-Link
target: Meny-Link

[ctx: TelemetryWidgetQuickLinkSetup]
en: Size
target: Størrelse

[ctx: TelemetryWidgetQuickLinkSetup]
en: Small
target: Liten

[ctx: TelemetryWidgetQuickLinkSetup]
en: You are about to delete this widget.
    Proceed?
target: Du er i ferd med å slette denne widgeten. Fortsett?

[ctx: TelemetryWidgetServo]
en: Select servo:
target: Velg servo:

[ctx: TelemetryWidgetServo]
en: Servo Name
target: Servo navn

[ctx: TelemetryWidgetServo]
en: Servo Value
target: Servo verdi

[ctx: TelemetryWidgetServoSetup]
en: Delete Widget
target: Slett Widget

[ctx: TelemetryWidgetServoSetup]
en: Large
target: Stor

[ctx: TelemetryWidgetServoSetup]
en: Size
target: Størrelse

[ctx: TelemetryWidgetServoSetup]
en: Small
target: Liten

[ctx: TelemetryWidgetServoSetup]
en: You are about to delete this widget.
    Proceed?
target: Du er i ferd med å slette denne widgeten. Fortsett?

[ctx: TelemetryWidgetTimer]
en: Empty timer
target: Tom timer

[ctx: TelemetryWidgetTimer]
en: Select timer!
target: Velg timer!

[ctx: TelemetryWidgetTimerAlarmConfig]
en: Beep
target: Bip

[ctx: TelemetryWidgetTimerAlarmConfig]
en: Beep + Vib.
target: Bip + Vibr.

[ctx: TelemetryWidgetTimerAlarmConfig]
en: No Alarm
target: Ingen alarm

[ctx: TelemetryWidgetTimerAlarmConfig]
en: Text
target: Tekst

[ctx: TelemetryWidgetTimerAlarmConfig]
en: Vibration
target: Vibrasjon

[ctx: TelemetryWidgetTimerSetup]
en: Delete Timer
target: Slett timer

[ctx: TelemetryWidgetTimerSetup]
en: Delete Widget
target: Slett Widget

[ctx: TelemetryWidgetTimerSetup]
en: Do you really want to delete this timer?
target: Vil du virkelig slette denne timeren?

[ctx: TelemetryWidgetTimerSetup]
en: Large
target: Stor

[ctx: TelemetryWidgetTimerSetup]
en: No timer is selected for this widget!
target: Ingen timer er valgt for denne widget!

[ctx: TelemetryWidgetTimerSetup]
en: Settings
target: Innstillinger

[ctx: TelemetryWidgetTimerSetup]
en: Size
target: Størrelse

[ctx: TelemetryWidgetTimerSetup]
en: Small
target: Liten

[ctx: TelemetryWidgetTimerSetup]
en: Timer Name
target: Timernavn

[ctx: TelemetryWidgetTimerSetup]
en: You are about to delete this widget.
    Proceed?
target: Du er i ferd med å slette denne widgeten. Fortsett?

[ctx: TelemetryWidgetValue]
en: Select Sensor!
target: Velg sensor!

[ctx: TelemetryWidgetValue]
en: Select Value!
target: Velg verdi!

[ctx: TelemetryWidgetValue]
en: Sensor Name
target: Sensornavn

[ctx: TelemetryWidgetValue]
en: Value Name
target: Verdi Navn

[ctx: TelemetryWidgetValueSensorSlaveChooser]
en: Capturing sensor information...
target: Henter sensorinformasjon...

[ctx: TelemetryWidgetValueSensorSlaveChooser]
en: Value
target: Verdi

[ctx: TelemetryWidgetValueSetup]
en: Addr.
target: Adr.

[ctx: TelemetryWidgetValueSetup]
en: Cancel
target: Avbryt

[ctx: TelemetryWidgetValueSetup]
en: Delete Widget
target: Slett Widget

[ctx: TelemetryWidgetValueSetup]
en: Large
target: Stor

[ctx: TelemetryWidgetValueSetup]
en: Menu
target: Meny

[ctx: TelemetryWidgetValueSetup]
en: Rescan Sensors
target: Rescan Sensorer

[ctx: TelemetryWidgetValueSetup]
en: Scanning for Sensors
target: Scanner etter Sensorer

[ctx: TelemetryWidgetValueSetup]
en: Size
target: Størrelse

[ctx: TelemetryWidgetValueSetup]
en: Small
target: Liten

[ctx: TelemetryWidgetValueSetup]
en: Value
target: Verdi

[ctx: TelemetryWidgetValueSetup]
en: You are about to delete this widget.
    Proceed?
target: Du er i ferd med å slette denne widgeten.
    Fortsett?

[ctx: TelemetryWidgetValueSlaveChooser]
en: Cancel
target: Avbryt

[ctx: TelemetryWidgetValueSlaveChooser]
en: Value
target: Verdi

[ctx: TimeRangeAlarmSettings]
en: (DOWN)
target: (NED)

[ctx: TimeRangeAlarmSettings]
en: (UP)
target: (OPP)

[ctx: TimeRangeAlarmSettings]
en: Beep
target: Bip

[ctx: TimeRangeAlarmSettings]
en: Disabled
target: Deaktivert

[ctx: TimeRangeAlarmSettings]
en: Interval
target: Intervall

[ctx: TimeRangeAlarmSettings]
en: Long Beep
target: Langt bip

[ctx: TimeRangeAlarmSettings]
en: One shot
target: Ett forsøk

[ctx: TimeRangeAlarmSettings]
en: Repeat
target: Gjenta

[ctx: TimeRangeAlarmSettings]
en: Short Speech
target: Kort tale

[ctx: TimeRangeAlarmSettings]
en: Signal End
target: Signal slutt

[ctx: TimeRangeAlarmSettings]
en: Speech
target: Tale

[ctx: TimeRangeAlarmSettings]
en: Text
target: Tekst

[ctx: TimeRangeAlarmSettings]
en: Vibration
target: Vibrasjon

[ctx: TimeRangeAlarmSettings]
en: of
target: av

[ctx: TimerAlarmItem]
en: Disabled
target: Deaktivert

[ctx: TimerAudioSettings]
en: Beep
target: Bip

[ctx: TimerAudioSettings]
en: Beep + Vib.
target: Bip + Vibr.

[ctx: TimerAudioSettings]
en: Control
target: kontroll

[ctx: TimerAudioSettings]
en: Delete Alarm
target: Slett alarm

[ctx: TimerAudioSettings]
en: Do you really want to delete this alarm?
target: Vil du virkelig slette denne alarmen?

[ctx: TimerAudioSettings]
en: No Alarm
target: Ingen alarm

[ctx: TimerAudioSettings]
en: Spch+Beep+Vib.
target: Tale + Bip + Vibr.

[ctx: TimerAudioSettings]
en: Speech + Beep
target: Tale + Bip

[ctx: TimerAudioSettings]
en: Speech + Vib.
target: Tale+ Vibr.

[ctx: TimerAudioSettings]
en: Speech only
target: Kun tale

[ctx: TimerAudioSettings]
en: Time/Range
target: Tid/Rekkevidde

[ctx: TimerAudioSettings]
en: Vibration
target: Vibrasjon

[ctx: TimerSetupItem]
en: Control Lap
target: Kontroll Runde

[ctx: TimerSetupItem]
en: Control Reset
target: Kontroll Nulstill

[ctx: TimerSetupItem]
en: Control Start
target: Kontroll Start

[ctx: TimerSetupItem]
en: Control Stop
target: Kontroll stopp

[ctx: TimerSetupItem]
en: Start Time
target: Start tid

[ctx: TimerSetupItem]
en: Stop Time
target: Stopp tid

[ctx: TimerSetupItem]
en: Timer Name
target: Timernavn

[ctx: TutorPupilExternalSettings]
en: Awaiting...
target: Venter...

[ctx: TutorPupilExternalSettings]
en: Core control:
target: Core kontroll:

[ctx: TutorPupilExternalSettings]
en: Erase
target: Slett

[ctx: TutorPupilExternalSettings]
en: External radio channel found!
target: Ekstern radiokanal funnet!

[ctx: TutorPupilExternalSettings]
en: Move control of the external radio...
target: Flytt kontroll for den eksterne radioen...

[ctx: TutorPupilExternalSettings]
en: Select channel:
target: Velg kanal:

[ctx: TutorPupilSettings]
en: Auto detect
target: Auto gjenkjenning

[ctx: TutorPupilSettings]
en: Core control
target: Core kontroll

[ctx: TutorPupilSettings]
en: Delete
target: Slett

[ctx: TutorPupilSettings]
en: Detection...
target: Gjenkjenning...

[ctx: TutorPupilSettings]
en: Disabled
target: Deaktivert

[ctx: TutorPupilSettings]
en: Do you really want to delete this core control?
target: Vil du slette denne Core kontrollen?

[ctx: TutorPupilSettings]
en: Enabled
target: Aktivert

[ctx: TutorPupilSettings]
en: External channel
target: Ekstern kanal

[ctx: TutorPupilSettings]
en: In use
target: I bruk

[ctx: TutorPupilSettings]
en: Save
target: Lagre

[ctx: TutorPupilSettings]
en: Trainer cord switch:
target: Skolekabelbryter:

[ctx: UpperFrame]
en: Do you really want to clear Max/Min values and all alerts for all widgets?
target: Vil du virkelig tømme max/min og alle advarsler for alle widgets?

[ctx: VarioSettings2]
en: Climb offset
target: Stig offset

[ctx: VarioSettings2]
en: Climbing gain
target: Stiger på nytt

[ctx: VarioSettings2]
en: Descend gain
target: Synker på nytt

[ctx: VarioSettings2]
en: Descend offset
target: Synk offset

[ctx: VarioSettings2]
en: Vario ON-OFF
target: Vario PÅ-AV

[ctx: VirtualSwitchItem]
en: Inverted
target: Invertert

[ctx: VirtualSwitchItem]
en: OFF
target: AV

[ctx: VirtualSwitchItem]
en: ON
target: PÅ

[ctx: VoiceSelector]
en: Chinese
target: Kinesisk

[ctx: VoiceSelector]
en: Clean Repo
target: Tøm repository

[ctx: VoiceSelector]
en: English
target: Engelsk

[ctx: VoiceSelector]
en: Finnish
target: Finsk

[ctx: VoiceSelector]
en: French
target: Fransk

[ctx: VoiceSelector]
en: German
target: Tysk

[ctx: VoiceSelector]
en: Italian
target: Italiensk

[ctx: VoiceSelector]
en: Norwegian
target: Norsk

[ctx: VoiceSelector]
en: Other
target: Andre

[ctx: VoiceSelector]
en: Play
target: Spill

[ctx: VoiceSelector]
en: Please wait!
    Voice server stopping...
target: Vennligst vent!
    Stemmeserver stopper...

[ctx: VoiceSelector]
en: Select
target: Velg

[ctx: VoiceSelector]
en: Spanish
target: Spansk

[ctx: VoiceSelector]
en: Starting voice server...
target: Starter stemmeserver...

[ctx: VoiceSelector]
en: Uninstall
target: Avinstallere

[ctx: VoiceSelector]
en: Voice server cannot start. Maybe you deleted all voices.
target: Stemmeserver kan ikke starte. Kanskje alle stemmer er slettet.

[ctx: VoiceSettings]
en: Control
target: Kontroll

[ctx: VoiceSettings]
en: Delete
target: Slett

[ctx: VoiceSettings]
en: Do you really want to delete this voice alarm?
target: Vil du virkelig slette denne talealarmen?

[ctx: VoiceSettings]
en: Replay
target: Alternativ

[ctx: VoiceSettings]
en: Source
target: Kilde

[ctx: VoiceSettings]
en: Value
target: Verdi

[ctx: VoiceSettingsItem]
en: One shot
target: Et forsøk

[ctx: VoiceSettingsItem]
en: Telem. all
target: Telem. alle

[ctx: VoiceSettingsItem]
en: Telem. short
target: Telem. kort

[ctx: VoiceSettingsItem]
en: Text
target: Tekst

[ctx: VoiceSettingsItem]
en: Time interval
target: Tidsintervall

[ctx: VoiceSettingsItem]
en: Timer short
target: Timer kort

[ctx: VoiceSettingsItem]
en: Value changed
target: Verdi endret

[ctx: VoiceSourceSelector]
en: Telemetry all
target: Telemetri alt

[ctx: VoiceSourceSelector]
en: Telemetry medium
target: Telemetri medium

[ctx: VoiceSourceSelector]
en: Telemetry short
target: Telemetri kort

[ctx: VoiceSourceSelector]
en: Text
target: Tekst

[ctx: VoiceSourceSelector]
en: Timer short
target: Timer kort

[ctx: VoiceSourceSelector]
en: Voice Settings
target: Taleinstillinger

[ctx: VoiceTimerAlarmSelector]
en: Attention
target: Obs

[ctx: VoiceTimerAlarmSelector]
en: Attention + Expired
target: Obs + Utgått

[ctx: VoiceTimerAlarmSelector]
en: Expired
target: Utgått

[ctx: VoiceTimerAlarmSelector]
en: None
target: Ingen

[ctx: VoiceTimerAlarmSelector]
en: Voice alarm for
target: Stemmealarm for

[ctx: VoiceTimerSelector]
en: Att. + Exp.
target: Obs. + utg.

[ctx: VoiceTimerSelector]
en: Attention
target: Obs

[ctx: VoiceTimerSelector]
en: Expired
target: Utgått

[ctx: VoiceTimerSelector]
en: Interval
target: Intervall

[ctx: VoiceTimerSelector]
en: Timer Name
target: Timernavn

[ctx: WlanSettings]
en: Connect
target: Koble til

[ctx: WlanSettings]
en: Connecting...
target: Kobler til...

[ctx: WlanSettings]
en: Disconnect
target: Frakoble

[ctx: WlanSettings]
en: Do you really want to forget all networks?
target: Vil du virkelig glemme alle nettverk?

[ctx: WlanSettings]
en: Forget
target: Glem

[ctx: WlanSettings]
en: Linkstat script doesn't exist or corrupted!
target: Linkstat script finnes ikke ellerer ødelagt!

[ctx: WlanSettings]
en: Network credentials cannot be deleted!
target: Nettverksinfo kan ikke slettes!

[ctx: WlanSettings]
en: Network password:
target: Nettverkspassord:

[ctx: WlanSettings]
en: OFF
target: AV

[ctx: WlanSettings]
en: ON
target: PÅ

[ctx: WlanSettings]
en: Obtaining...
target: Henter...

[ctx: WlanSettings]
en: Password:
target: Passord:

[ctx: WlanSettings]
en: Portal Login:
target: Portalpålogging:

[ctx: WlanSettings]
en: Scanning...
target: Scanner...

[ctx: main]
en: Battery is weak!
    GUI is shutting down...
target: Batteri er svakt!
    GUI avslutter...

[ctx: main]
en: No screenshot is stored!
target: Ikke noe skjermprint lagret!

[ctx: main]
en: Screenshot is stored in file:
target: Skjermprint lagret i file:

[ctx: main]
en: Trying model fast start...
target: Forsøker hurtigstart av modell...
